BEFORE FIRST USE: Please leave the dehumidifier to stand outside the packaging for 24 HOURS before connecting 0 power, The dehumidifiers may have bean toted or placed upside down during shipping, Leave the dehumidifier to stand upright for 24 hours so the ofl in the compressor can settle from the move, nwt doing so can affect the performance or lifespan of the dehumidifier.
PARTS IDENTIFICATION Control Panel Air Outlet Access door Gravity Drain Outlet Remote Control Port Pump Drain Outlet Power Cord Port Handle Hand Screw Air Inlet Adjustable Foot MOTE: DO NOT OBSTRUCT THE AIR INLET AND/OR OUTLET.
OPERATION INSTRUCTIONS « 1. Position Your Dehumidifier @ Install the dehumidifier horizontally to minimize vibration and or noise, @® You can adjust the feet to level the dehumidifier. To adjust the feet, @® Turn the nut in a clockwise direction to get the nut loosen; @® Turn the foot in a clockwise direction to get the foot down or tum the footing counterclockwise direction to get the foot up; ® Turn the nut in a counterclockwise direction to fix the foot.
2. Set Up the Drainage {1) Drain by Internal Pump The dehumidifier has an internal pump that helps to drain the condensation water freely. When using the pump feature, + The Gravity Drain Outlet needs to be sealed by the included stopper; = Connect the drain hose to the Pump Drain Outlet; + Place the unattached end of the hose in a sink, bucket, pump sump, or out of a window anywhere that water can drain out safely.
