Full Product Manual

MoJack EZ Lift

Operating Instructions

Preparing the MoJack EZ for Use (Steps 1 - 7)

STEP 2

Installing Lift Arm

• Hang the Lift Arm on the Carrier by hooking the slotted area

of the Lift Arm over the top bar of the Carrier.

• Insert Clevis Pin through the hole in Carrier and lock by

fastening the Small Hair Pin to the Clevis Pin.

Top Bar

Carrier

Clevis Pin hole

Clevis PinSmall Hair Pin

STEP 1

Unfolding MoJack EZ

• Pull locking pin out to unlock.

• Raise the Tower by pulling up on the Grip Handle.

Once the Tower is in the vertical position, lift up on

the Grip Handle and drop the Tower into the Base.

• The tower will be securely locked in place when the

locking pin retracts and the tower is snug in the

channel behind the crossbar.

Tower Locking

(locked position)

Tower Locking Pin

(unlocked position)

Crossbar in

channel

Crossbar

Drop Tower into Base

Tower Locking Pin

(unlocked position)

When Tower is

above the bar,

unit is NOT

locked and

UNSECURE.

When Tower sits

behind the bar,

unit is locked

and

fully secure.