Full Product Manual

MoJack EZ Lift

Operating Instructions

STEP 6

STEP 7

Reverse Front Tires of Mower

(optional – if not applicable, skip to Step 8)

• In some cases, the mower deck or anti-scalping wheels will hit the

Lift Arm while the mower is being raised. This is often the case if

part of the deck (including the anti-scalping wheels) protrudes past

the center line of the front wheels of the mower.

• Rotate the front tires 180° so that they are in the reverse position.

• Remove the Support Rods from the Wheel Pads and slide the

MoJack EZ underneath the mower.

• Secure the Support Rods to Wheel Pads with Large Hair Pins.

Using the MoJack EZ (Steps 8 - 15)

STEP 8

Move Mower onto MoJack EZ

The MoJack EZ must be used on a solid

level surface.

• Drive or roll the mower onto the Wheel Pads.

Stop engine and remove the key.

Adjusting Support Rods for Proper Tire Size

• Adjust Support Rods on Wheel Pads to accommodate the front

tire size of the mower. Please refer to the chart below for proper

Support Rod placement based on the diameter of the mower’s

front tires.

• Secure Support Rods to Wheel Pads with Large Hair Pins.

Reverse

Wheel

Position

Forward

Wheel

Position

Support Rod

Large Hair Pin

See page 18 for more more detailed guide.

10” - 11.5” (25cm - 29cm)

12” - 15” (30cm - 38cm)

15.5” - 17” (39cm - 44cm)

SUPPORT ROD GUIDE FOR TIRE SIZES