Instructions for Assembly and Operation Instrucciones de montaje y funcionamiento Instructions pour l’Assemblée et de l’opération GIVING MOWER MAINTENANCE A LIFT. ELEVE EL NIVEL DE MANTENIMIENTO DE SU PODADORA. ÉLÈVE LES NORMES EN MATIÈRE D’ENTRETIEN DES TONDEUSES. www.theMoJack.
MoJack PRO Lift Introduction This manual contains assembly, parts, operating, maintenance, adjustment and safety instructions for your MoJack PRO lift. BEFORE USING YOUR MOJACK PRO, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following these operating, maintenance and safety instructions, you will prolong the life of your MoJack lift and promote safe operation.
MoJack PRO Lift Warnings and Safety Instructions Read and understand all safety and operating instructions before using the MoJack PRO. Never allow anyone unfamiliar with the safety or operating instructions to use the MoJack PRO. Follow all safety and servicing instructions provided by the lawn mower’s manufacturer before using the MoJack PRO. Do not modify the MoJack in any way. Any modifications will void any and all warranties and could compromise your personal safety.
MoJack PRO Lift Warranty and Returns LIMITED WARRANTY For two years for residential use and one year for commercial use MoJack warrants the product against failure due to defect in material or workmanship when product is used properly. MoJack will replace any defective part at no cost. This warranty does not cover any product that has been altered or adjusted, or any product that has been misused or abused. THIS IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY.
MoJack PRO Lift Parts List Item No. Qty. Item No. Qty.
MoJack PRO Lift Hardware List Item No. Qty. Item No. Qty. 13 2 Cap Screw – M12-1.75 x 85 19 1 Winch Handle Washer – 12mm 14 4 Nylock Nut – M12-1.75 20 1 Clevis Pin 15 1 Cap Screw – M12-1.75 x 95 21 4 Push Pin 16 3 Cap Screw – M10-1.5 x 30 22 3 Hair Pin 17 5 Nylock Nut – M10-1.5 23 1 Cap Screw – M14-2.0 x 100 18 3 Winch Washer – 10mm 24 1 Nylock Nut – M14-2.0 Description 13 15 18 Cap Screw – M12-1.75 X 85 19 21 23 Nylock Nut – M12-1.
MoJack PRO Lift Assembly Instructions STEP 1 Remove MoJack PRO from package. Inventory items to be certain all parts and hardware are present. If any parts or hardware are missing, please contact MoJack at 1-877-575-3173 or email us at parts@themojack.com. STEP 2 Assemble the Wheel 4 to the Base 3 by inserting Cap Screw 13 and Nylock Nut and tighten. Repeat with second Wheel.
MoJack PRO Lift Assembly Instructions STEP 4 Cap Screws 16 Attach the Winch 9 and Grip Handle 7 to the Tower 1 using Cap Screws 16 , Nylock Nuts 17 and Winch Washers 18 , and tighten as shown. Winch Washer 18 Winch 9 18 Winch Washers Grip Handle 7 17 Nylock Nut 1 Tower Nylock Nuts 17 STEP 5 Attach Winch Handle 10 to Winch 9 using Nylock Nut 14 and Winch Handle Washer 19 and tighten as shown.
MoJack PRO Lift Assembly Instructions STEP 8 Top Bar of Carrier Hang the Lift Arm 2 on the Carrier by hooking the slotted area of the Lift Arm under the top bar of the Carrier. Lift Arm must be inserted from the front and then lowered which fastens Lift Arm into place. Insert Clevis Pin 20 through the hole in the Carrier and lock by fastening the Hair Pin 22 to the Clevis Pin.
MoJack PRO Lift Operating Instructions Some steps of the Operating Instructions are repeated from the Assembly Instructions. The Operating Instructions will show a full working cycle of the MoJack PRO. Before using the MoJack PRO, carefully read this manual in its entirety. Preparing the MoJack PRO for Use (Steps 1 - 8) STEP 1 Unfolding MoJack PRO • Pull and rotate Tower Locking Pin 90 degrees to the unlocked position. • Raise the Tower by pulling up on the Grip Handle.
MoJack PRO Lift Operating Instructions STEP 2 Top Bar of Carrier Installing Lift Arm • Hang the Lift Arm on the Carrier by hooking the slotted area of the lift Arm under the top bar of the Carrier. Lift Arm must be inserted from the front and then lowered which fastens Lift Arm into place. • Secure Lift Arm to Carrier with Clevis Pin and Hair Pin.
MoJack PRO Lift Operating Instructions STEP 5 Familiarize Yourself with the MoJack PRO • Practice raising and lowering the Lift Arm before attempting to lift the mower. (see Steps 9-16 on how to raise and lower the Lift Arm) • Practice Step 21 if you intend to raise or lower the mower with the drill attachment. STEP 6 Aligning Wheel Pads to Fit the Mower • Place the front tires of mower 6” in front of the Wheel Pads.
MoJack PRO Lift Operating Instructions STEP 8 Reverse Front Tires of Mower (optional – if not applicable, skip to Step 9) • In some cases, the mower deck or anti-scalping wheels will hit the Lift Arm while the mower is being raised. This is often the case if part of the deck (including the anti-scalping wheels) protrudes past the center line of the front wheels of the mower. • Rotate the front tires 180° so that they are in the reverse position.
MoJack PRO Lift Operating Instructions STEP 11 Adjusting the Winch Handle (optional) • The optimal Winch Handle length is in the longer setting. Some mowers have brush guards or larger hoods that interfere with the longer Winch Handle. The Winch Handle can be adjusted by removing the Nylock Nut and Winch Handle Washer Longer Setting – 12” Radius and re-attaching Winch Handle Washer in the shorter setting.
MoJack PRO Lift Operating Instructions STEP 14 Preparing the Mower for Service • Place wheel chocks (not included) behind the back tires of the mower. • Now apply the parking brake on the mower. Wheel Chock STEP 15 Lowering the Mower • Remove wheel chocks. • Release the parking brake. • Mower must be in neutral. • Rotate the Winch Handle 1/2 turn clockwise while squeezing the Grip Handle and Ratchet Release Handle together.
MoJack PRO Lift Operating Instructions Preparing the MoJack PRO for Storage (Steps 17 - 20) STEP 17 Removing the Wheel Pads • Remove Wheel Pad Push Pins and pull Wheel Pads out from the Lift Arm Inserts. • Store the Push Pins in the Wheel Pads. Push Pin Lift Arm Insert Wheel Pad STEP 18 Lift Arm Removing LIft Arm Inserts • Remove Lift Arm Push Pins and pull Lift Arm Inserts from the Lift Arm. • Store the Push Pins in the Lift Arm.
MoJack PRO Lift Operating Instructions STEP 20 Folding the MoJack PRO • Pull and rotate Tower Locking Pin 90 degrees to the unlocked position. • Raise the Tower out of the Base by pulling up on the Grip Handle and then lower the Tower. • Secure the Tower by rotating Tower Locking Pin until ring drops into locking slot. Tower Locking Pin Tower Locking Pin THE MOJACK PRO IS NOW READY FOR STORAGE OR TRANSPORT.
MoJack PRO Lift Maintenance Schedule Winch • Before each use, always check for any worn, loose or damaged parts on the MoJack PRO. If any damaged parts are present, do not use the MoJack PRO and contact MoJack at 1-877-575-3173. • Check the Lifting Strap before every use. Make sure the Lifting Strap is not damaged or torn and the stitching on the loop is secure. If any of these issues are present, do not use the MoJack Pro and call MoJack at 1-877-575-3173.
MoJack PRO Lift Support Rod Guide for Tire Sizes 10” – 11.5” (25cm – 29cm) Tire Size 12” – 15” (30cm – 38cm) Tire Size 15.
