Instructions for Assembly and Operation Instrucciones para Asamblea y de la Operación www.theMoJack.com 1-877-575-3173 Ver.
MoJack 750XT Lift Introduction This manual contains assembly, parts, operating, maintenance, adjustment and safety instructions for your MoJack 750XT lift. BEFORE USING YOUR MOJACK 750XT, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following these operating, maintenance and safety instructions, you will prolong the life of your MoJack lift and promote safe operation.
MoJack 750XT Lift Warnings and Safety Instructions Read and understand all safety and operating instructions before using the MoJack 750XT. Never allow anyone unfamiliar with the safety or operating instructions to use the MoJack 750XT. Follow all safety and servicing instructions provided by the lawn mower’s manufacturer before using the MoJack 750XT. Do not modify the MoJack 750XT in any way. Any modifications will void any and all warranties and could compromise your personal safety.
MoJack 750XT Lift Warranty and Returns LIMITED WARRANTY For two years for residential use and one year for commercial use MoJack warrants the product against failure due to defect in material or workmanship when product is used properly. MoJack will replace any defective part at no cost. This warranty does not cover any product that has been altered or adjusted, or any product that has been misused or abused. THIS IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY.
MoJack 750XT Lift Parts List Item No. Qty. Item No. Qty.
MoJack 750XT Lift Hardware List Item No. Qty. 11 1 Cap Screw M12-1.75 X 80 12 2 Cap Screw M12-1.75 X 65 13 3 Carriage Bolt M8-1.25 X 20 14 3 Nylock Nut – M12-1.75 15 3 Nylock Nut – M8-1.25 16 4 Push Pin 17 1 Clevis Pin 18 1 Small Hair Pin 19 2 Large Hair Pin Description 13 Carriage Bolt M8-1.25 X 20 11 Cap Screw M12-1.75 X 80 12 Cap Screw M12-1.75 X 65 14 Nylock Nut – M12-1.75 16 Push Pin 15 Nylock Nut – M8-1.
MoJack 750XT Lift Assembly Instructions STEP 1 Remove MoJack 750XT from package. Check to be certain all parts and hardware are present. If any parts or hardware are missing, please contact MoJack at 1-877-575-3173 or email us at parts@themojack.com. STEP 2 Cap Screw 12 Assemble the Wheel 4 to the Base 3 by inserting Cap Screw 12 and Nylock Nut 14 and tighten. Repeat with second Wheel. Note: Do not over tighten Nylock Nut.
MoJack 750XT Lift Assembly Instructions STEP 4 Attach the Grip Handle 7 to the Tower 1 with two Carriage Bolts 13 and two Nylock Nuts 15 . Carriage Bolt 13 Nylock Nut 15 Grip Handle 7 Tower 1 STEP 5 Attach the Crank Handle 8 to the Tower 1 by inserting Carriage Bolt 13 with threads facing up and fasten with Nylock Nut 15 . Crank Handle 8 Nylock Nut 15 Note: There are two holes in the Crank Handle. The hole closest to the rubber grip will provide a 6” radius for cranking.
MoJack 750XT Lift Assembly Instructions STEP 7 Lift Arm 2 Slide Lift Arm Inserts 6 into both sides of the Lift Arm 2 and secure with Push Pins 16 as shown. 16 Push Pin Push Pin 16 Lift Arm Insert 6 Lift Arm Insert 6 STEP 8 Wheel Pad 5 Ready the Wheel Pads 5 for installation by adding Support Rods 11 and Large Hair Pins 19 . Large Hair Pin 19 Support Rod 11 STEP 9 Slide the Wheel Pads 5 onto both sides of the Lift Arm Inserts 6 and secure with Push Pins 16 .
MoJack 750XT Lift Operating Instructions Some steps of the Operating Instructions are repeated from the Assembly Instructions. The Operating Instructions will show a full working cycle of the MoJack 750XT. Before using the MoJack 750XT, carefully read this manual in its entirety.
MoJack 750XT Lift Operating Instructions Preparing the MoJack 750XT for Use (Steps 1 - 8) STEP 1 Tower Locking Pin (unlocked position) Unfolding MoJack 750XT • Pull locking pin out to unlock. • Raise the Tower by pulling up on the Grip Handle. Once the Tower is in the vertical position, lift up on the Grip Handle and drop the Tower into the Base. • The tower will be securely locked in place when the locking pin retracts and the tower is snug in the channel behind the crossbar.
MoJack 750XT Lift Operating Instructions STEP 3 Lift Arm Installing Lift Arm Inserts • Slide Lift Arm Inserts into both sides of the Lift Arm and secure with Push Pins. Push Pin Push Pin Lift Arm Insert Lift Arm Insert STEP 4 Push Pin Installing Wheel Pads • Slide Wheel Pads onto Lift Arm Inserts and temporarily secure with Push Pins.
MoJack 750XT Lift Operating Instructions STEP 6 Aligning Wheel Pads to Fit Mower • Place the front tires of mower 6” in front of the Wheel Pads. • Remove Push Pins and align the Wheel Pads so that the front mower tires will be centered on the Wheel Pads. • Replace the Push Pins to lock the Wheel Pads to the Lift Arm. Wheel Pads must be equal distance from the Lift Arm to maintain proper balance.
MoJack 750XT Lift Operating Instructions Using the MoJack 750XT (Steps 9 - 16) STEP 9 Move Mower onto MoJack 750XT The MoJack 750XT must be used on a solid level surface. • Drive or roll the mower onto the Wheel Pads. Stop engine and remove the key. STEP 10 Strapping Front Mower Tires to Wheel Pads • Secure the front mower tires to the Wheel Pads using the Safety Straps 10.
MoJack 750XT Lift Operating Instructions STEP 12 Raising the Mower • Raise the mower by rotating the Crank Handle clockwise. • See Step 22 for raising the mower with drill attachment. Do not attempt to lift more than 750 lbs. The MoJack 750XT must be used on a solid level surface. The engine must be turned off and key removed. The mower must be in neutral. Disengage transmission if neccessary. The parking brake must be off during this step. The Safety Straps must be firmly tightened.
MoJack 750XT Lift Operating Instructions STEP 15 Lowering the Mower • Remove wheel chocks. • Release the parking brake. • Mower must be in neutral. Disengage transmission if neccessary. • Pull and hold the Carrier Locking Pin out and turn the Crank Handle counter clockwise until Wheel Pads are firmly on the ground. The Carrier Locking Pin must be pulled out until it clears the bottom Safety Hole. Do not force the handle past the lock point, as this may damage the Screw Thread.
MoJack 750XT Lift Operating Instructions STEP 18 Lift Arm Push Pin Removing LIft Arm Inserts • Remove Lift Arm Push Pins and pull Lift Arm Inserts from the Lift Arm. • Store the Push Pins in the Lift Arm. Push Pin Lift Arm Insert STEP 19 Small Hair Pin Unhooking the Lift Arm • Remove Small Hair Pin and Clevis Pin from Lift Arm. • Unhook the Lift Arm from the Carrier. • Store the Small Hair Pin and Clevis Pin in the Lift Arm.
MoJack 750XT Lift STEP 21 Lift Tower out of Base Folding the MoJack 750XT • Pull locking pin out to unlock. • Raise the Tower out of the Base by pulling up on the Grip Handle and then lower the Tower. • The tower will be securely locked in place when the locking pin retracts. Tower Locking Pin (unlocked position) Tower Locking Pin (locked position) THE MOJACK 750XT IS NOW READY FOR STORAGE OR TRANSPORT.
MoJack 750XT Lift Maintenance Schedule • Before each use, always check for any worn, loose or damaged parts on the MoJack 750XT. If any damaged parts are present, do not use the MoJack 750XT and contact MoJack at 1-877-575-3173. • Clean and oil the screw thread after every 50 uses or at least once a year using light machine oil. • Place lithium grease between the Crank Handle Base and the brass bearing after every 50 uses or once a year.
MoJack 750XT Lift Support Rod Guide for Tire Sizes 10” – 11.5” (25cm – 29cm) Tire Size 12” – 15” (30cm – 38cm) Tire Size 15.
Elevador MoJack 750XT Introducción Este manual contiene instrucciones sobre montaje, partes, funcionamiento, mantenimiento, ajuste y seguridad del elevador MoJack 750XT. ANTES DE UTILIZAR EL ELEVADOR MoJack 750XT, LEA CON ATENCIÓN TODO EL MANUAL. Si sigue estas instrucciones de funcionamiento, mantenimiento y seguridad, prolongará la vida del elevador MoJack y favorecerá su funcionamiento seguro.
Elevador MoJack 750XT Advertencias e instrucciones de seguridad Asegúrese de leer y comprender todas las instrucciones de seguridad y funcionamiento antes de utilizar el equipo MoJack 750XT. No permita que una persona no familiarizada con las instrucciones de seguridad o funcionamiento utilice el equipo MoJack 750XT. Siga todas las instrucciones de seguridad y servicio proporcionadas por el fabricante de la podadora antes de utilizar el elevador MoJack 750XT.
Elevador MoJack 750XT Garantía y devoluciones GARANTÍA LIMITADA MoJack garantiza este producto durante dos años para uso residencial y un año para uso comercial, en caso de producirse defectos de material o de mano de obra, siempre que el producto se haya utilizado en forma adecuada. MoJack reemplazará las partes defectuosas sin costo. Esta garantía no cubre productos que hayan sido alterados o ajustados, ni productos que hayan sido utilizados en forma abusiva o incorrecta.
Elevador MoJack 750XT Parts List Item No. Qty. Item No. Qty.
Elevador MoJack 750XT Lista de materiales Nº Elem. Cant. 11 1 Tornillo de cabeza M12 - 1.75 X 80 12 2 Tornillo de cabeza M12 - 1.75 X 65 13 3 Perno de carruaje M8 - 1.25 X 20 14 3 Tuerca Nylock – M12-1.75 15 3 Tuerca Nylock – M8-1.25 16 4 Pasador de empuje 17 1 Pasador de horquilla 18 1 Horquilla chica 19 2 Horquilla grande Descripción 13 Perno de carruaje M8 - 1.25 X 20 11 Tornillo de cabeza M12 - 1.75 X 80 12 Tornillo de cabeza M12 - 1.75 X 65 14 Tuerca Nylock – M12-1.
Elevador MoJack 750XT Instrucciones de montaje PASO 1 E750XTraiga el elevador MoJack 750XT del empaque. Haga un inventario de las partes para estar seguro de que posee todas las partes y materiales. Si faltan partes o materiales, póngase en contacto con MoJack llamando al 1-877-575-3173 o por correo electrónico a parts@themojack.com. PASO 2 Monte la rueda 4 a la base 3 , insertando el tornillo de cabeza 12 y la tuerca Nylock 14 , y fíjelos. Repita el procedimiento con la segunda rueda.
Elevador MoJack 750XT Instrucciones de montaje PASO 4 Fije el asa de seguridad 7 a la torre 1 con dos pernos de carruaje 13 y dos tuercas Nylock 15 . Perno de carruaje 13 Tuerca Nylock 15 Asa de seguirdad 7 Torre 1 PASO 5 Fije el asa de seguridad 8 a la torre 1 insertando el perno de carruaje 13 con la rosca hacia arriba y ajústelo con la tuerca Nylock 15 . Nota: Hay dos orificios en la manivela.
Elevador MoJack 750XT Instrucciones de montaje PASO 7 Introduzca los insertos del brazo elevador 6 a ambos lados del brazo elevador 2 y fíjelos con pasadores de empuje 16 como se indica. Brazo elevador 2 Pasador de 16 empuje Pasador de 16 empuje Inserto del brazo 6 elevador Inserto del brazo 6 elevador PASO 8 Tope de rueda 5 Prepare los topes de rueda 5 para instalar colocando las varillas de soporte 11 y las horquillas 19 .
Elevador MoJack 750XT Instrucciones de funcionamiento Algunos pasos de las instrucciones de funcionamiento son iguales a las instrucciones de montaje. Las instrucciones de funcionamiento mostrarán un ciclo de trabajo completo del elevador MoJack 750XT. Ante de utilizar el elevador MoJack 750XT, lea con atención todo el manual.
Elevador MoJack 750XT Instrucciones de funcionamiento Preparación del elevador MoJack 750XT para el uso (pasos 1 - 8) PASO 1 Torre Locking Pin (desbloqueado) Cómo desplegar el elevador MoJack 750XT • Tire el pasador de bloqueo a desbloquear. • Levante la Torre tirando hacia arriba de la manija de agarre. Una vez que la torre está en la posición vertical, levante la manija de agarre y colocar la torre en la Base.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 3 Brazo elevador Instalación de los insertos del brazo elevador • Introduzca los insertos del brazo elevador a ambos lados del brazo y fíjelos con pasadores de empuje. Pasador de empuje Pasador de empuje Inserto del brazo elevador Inserto del brazo elevador PASO 4 Pasador de empuje Instalación de los topes de rueda • Deslice los topes de rueda en los insertos del brazo elevador y fíjelos provisoriamente con pasadores de empuje.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 6 Alineación de los topes de rueda para ajustar a la podadora • Coloque los neumáticos delanteros de la podadora a una distancia de 6” (15 cm) frente a los topes de rueda. • E750XTraiga los pasadores de empuje y alinee los topes de rueda de forma que los neumáticos delanteros de la podadora queden centrados en relación con los topes de rueda. • Reemplace los pasadores de empuje para bloquear los topes de rueda al brazo elevador.
Elevador MoJack 750XT Instrucciones de funcionamiento Utilización del elevador MoJack 750XT (Paso 9 - 16) PASO 9 Traslado de la podadora hacia el elevador MoJack 750XT El elevador MoJack 750XT se debe utilizar sobre una superficie sólida y nivelada. • Conduzca o haga rodar la podadora hasta los topes de rueda. Detenga el motor y e750XTraiga la llave.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 12 Elevación de la podadora • Eleve la podadora girando la manivela en sentido horario. • Consulte el paso 22 para elevar la podadora con un accesorio de taladro. No intente levantar más de 750 lbs (340 kg). El elevador MoJack 750XT se debe utilizar sobre una superficie sólida y nivelada. Se debe apagar el motor y e750XTraer la llave. La podadora debe estar en posición neutral. Desactive la transmisión si es necesario.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 15 Descenso de la podadora • Quite las cuñas de las ruedas. • Libere el freno de estacionamiento. • La podadora debe estar en posición neutral. Desactive la transmisión si es necesario. • Tire del pasador de bloqueo del transportador hacia afuera y manténgalo así, girando la manivela en sentido antihorario hasta que los topes de rueda estén ubicados firmemente en el suelo.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 18 E750XTracción de los insertos del brazo elevador • E750XTraiga los pasadores de empuje del brazo elevador y e750XTraiga los insertos del brazo elevador. • Guarde los pasadores de empuje en el brazo elevador. Brazo elevador Pasador de empuje Pasador de empuje Inserto del brazo elevador Inserto del brazo elevador PASO 19 Horquilla Desenganche del brazo elevador • E750XTraiga la horquilla pequeña y el pasador de horquilla del brazo elevador.
Elevador MoJack 750XT Instrucciones de funcionamiento PASO 21 Torre levante de la base Plegado del elevador MoJack 750XT • Tire el pasador de bloqueo a desbloquear. • Levante la Torre de la Base tirando hacia arriba de la manija de agarre y luego baje la Torre. • La torre se bloqueará en su lugar cuando se retrae pasador de bloqueo. Torre De Pasador De Bloqueo (desbloqueado) Torre De Pasador De Bloqueo (bloqueado) EL ELEVADOR MoJack 750XT ESTÁ LISTO PARA SU ALMACENAMIENTO O TRANSPORTE.
Elevador MoJack 750XT Programa de mantenimiento • Antes de cada uso, controle si hay partes gastadas, sueltas o dañadas en el elevador MoJack 750XT. Si hubiera partes dañadas, no utilice el elevador MoJack EZ y póngase en contacto con MoJack llamando al 1-877-575-3173. • Limpie y aceite la rosca del tornillo cada 50 usos o como mínimo una vez al año con aceite lubricante liviano.
Elevador MoJack 750XT Guía de varillas de soporte para tamaños de neumáticos Tamaño de neumático 10” – 11.5” (25 cm – 29 cm) Tamaño de neumático 12” – 15” (30 cm – 38 cm) Tamaño de neumático 15.
www.theMoJack.com 1-877-575-3173 Patent pending. © 2014 MoJack Distributors, LLC. MoJack and the MoJack logo are registered trademarks of MoJack Distributors, LLC. MoJack 750XT is a trademark of MoJack Distributors, LLC. All rights reserved.