User's Manual Part 1

CHAPTER II: BASICS

STARex MANUAL

When the cursor is hovering the status icon the following message will appear: Go to Network

Settings to change the conguration to DHCP or static IP address

This only appears when the Status is Temporary IP Address.

Additionally, further information can be presented:

• Current Status: It has two possible values: “Running”, when a RFID program is running

and “Idle” if no RFID programs are running. The number of clients is also displayed.

• Current Date. It shows the current date according to the Time Zone congured inside the

Network Settings conguration.

• Current Time. It shows the current time according to the Time Zone congured inside the

Network Settings conguration.

• Uptime: The current time the STARex has been up and running.

• Version: The release version of this STARex.

• Region: Shows the current frequency regulation of the STARex.

• IP: The IP address congured or assigned to this STARex.

• MAC: The mac address of this STARex.

QUICK START Home Page

Following, the STARex status section is represented in four graphics that display information about

the CPU load, the disk space, the number of events per second and the system temperature. The

graphics will be displayed in three possible colors: red, yellow or green. The color will depend on the

health status at that moment, green color means optimal performance, yellow color means warning

and red color means error.

For example, the CPU load at optimum is under 80%, above that point the status is indicated as warning until 95% is reached which is indicated as an

error. For the memory space status the optimum is above 70%, between 30% to 70% the status is indicated as warning and below 30% is indicated as

an error. For the events per second the status color optimum is below 400 events/sec, the warning between 400 and 700 and above 700 is error. For the

system temperature the values are displayed in Fahrenheit and Celsius degrees, the optimum is under 70 Celsius degrees, the warning between 70 and

85 degrees, and above 85 is an error.

b. Server Information