User's Manual Part 2

74
STARex MANUAL
NTP: Single entry for NTPs is displayed and available to edit only when the option “Enable NTP” is selected.
If NTP is enabled the elds “Set Date” and “Set Time” will be disabled.
Date, Time & Timezone: A eld to set the date, time and timezone are available. The elds display the user’s machine date, time and timezone by default.
Clicking on the “Set Date” eld a datepicker is displayed in order to choose the date. Clicking on the “Set Time” eld a time picker is displayed in order to
choose the time for the STARex.
There are labels to show the current date, time, and time zone, the labels show the current values congured in the STARex. These values are the same
as the ones displayed in the landing page.
CHAPTER V: NETWORK SETTINGS
NETWORK SETTINGS