User's Manual Part 2

77
STARex MANUAL
6.1.2 REBOOT
6.1.3 FACTORY RESTORE
This option allows the user to reboot the STARex, the result notication messages are displayed in the area below the buttons.
This option allows the user to restore the STARex back to its original conguration (the one given in the manufacturing) including all the default network
settings and default name. The notication messages are displayed in the area below the buttons.
Important. Once the reboot is done, any of the changes in the RFID Settings page (simpleProgram conguration) will be saved.
Any subscription running at the moment is stopped, it is needed to start it again after the update process.
CONTROL Reboot & Factory RestoreCHAPTER VI: CONTROL
The Basic mode default settings are:
- No eXpanders enabled.
- 2nd receive antenna set to Auto.
- Physical Layer Defaults:
- Target Group: A
- Session: S1
- Q: 5
- LF: 256 kHz
- Modulation: Miller-4
- Selects enabled and NO mask