User's Manual Part 2

85
STARex MANUAL
6.4 MQTT CONFIGURATION
The “MQTT Conguration” page allows the user to set up the hostname/IP address, port to connect and test to the MQTT broker.
The “Save” and “Connect” buttons are enabled once the MQTT broker IP and port are entered.
With the “Connect” option it is possible to connect to the MQTT broker without saving the information and with the “Save” option the data to connect to the
MQTT Broker is saved.
After the MQTT broker is connected, the label of the “Connected” button turns to “Disconnect” and this option disconnects the STARex from the MQTT broker.
MQTT CONFIGURATIONCHAPTER VI: CONTROL