User's Manual Part 2

59
STARex MANUAL
3.1.4 PROFILES
The proles section display four available options, the rst three: “Max Inventory”, “RTLS” and “Large Volume Portal” reect common RFID modes of
operation, the last one “Custom”, allows you to personalize the complete conguration.
- The “Max Inventory” prole conguration, maximize the tag inventory counts across all the antennas. An estimated total number of tags
covered by the STARex’s set of antennas is required. This prole automatically selects the session S2, the target group A, a Q value
calculated according to the estimated number of tags entered, an LF of 256 kHz., a modulation M4 and the selects enabled periodically.
- The “RTLS” prole conguration, maximize real time location response from all tags. An estimated total number of tags covered by the
STARex’s set of antennas is required. This prole automatically selects the session S1, the target group A, a Q value calculated according
to the estimated number of tags entered, an LF of 256 kHz., a modulation M4 and the selects enabled.
- The “Large Volume Portal” prole conguration, read high volume of tags in a short period of time through a portal. An estimated maximum
number of tags that will be moved through the portal is required. This prole automatically selects the session S1, the target group A, a Q
value calculated according to the estimated number of tags entered, an LF of 256 kHz., a modulation M4 and the selects disabled.
- The “Custom” prole conguration, allows the user to personalize the settings. Three sections are enabled selecting this option: “2nd
Receive Antenna Mode”, “Physical Layer Settings” and “Select Pattern”.
RFID SETTINGS ProlesCHAPTER III: RFID SETTINGS