User's Manual

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
Page
34
of
45
Confidential and Proprietary
Unsubscribe Unsubscribe <URL> to <ECSpec>
(Re)Define Door Spec Define <ECSpec> for configured zones with Dock Door
Type. If the zones are added or changed, a Redefine of
the <ECSpec> is required to pick up the new doors.
(Re)Define Loc Spec Define <ECSpec> for configured zones with Location Type.
If the zones are added or changed, a Redefine of the
<ECSpec> is required to pick up the new location zones.
(Re)Define HeartBeatSpec Defines a heartbeat <ECSPec>
Undefine Undefine <ECSpec>
Table 15: ALE Configuration Action Listing
VIEW TAB
The Topology page is a 2-D graphical representation of the relative locations of the STAR and eNodes
configured so far. It is most useful as a check to see if the XY dimensions have been entered correctly.
The following figure shows the simple topology of a very basic setup.
Figure 29: View Topology Page
STATUS TAB
The Status tab provides an interface used to view hardware diagnostics. Pressing the STAR Status
button brings up the screen below with the following columns:
• Columns:
• Name: aiaName of the STAR.
• Uptime : Time for which the star has been running.
• Temperature : temperature in degree C as measured by the temperature sensor inside the
STAR .