User's Manual

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
Page
35
of
45
Confidential and Proprietary
• State : Running/Idle
• Last Known Good : Time stamp indicating the LKG configuration wrt UTC.
• Firmware Version : Current BSP Version on the STAR.
Figure 30: STAR Status
It is possible to now use the lower toolbar to also see status on eNodes, Sensors and WSDL. For
example, below screen shows status on Sensors, with the following columns:
• Columns:
• txID : eNode ID to which sensor is connected.
• Health : health of the sensor.
• State : whether idle or tripped .
• Last Event : Last event of the sensor.
• Sensor Stats refreshed every 3 seconds.
Figure 31: Sensor Status
eNodes status is shown below, with the following columns:
eNodes Status
• PER are measured over different window lengths for both wireless and wired eNodes.
• Total : Overall packet error rate.
• 10K – packet error rate computed over the 10k most recent packets.
• 1k – PER over 1k most recent packets.
• 100 – PER over 100 most recent packets .
• Command PER and Channel Lock Error rate are applicable only for wireless eNodes.