User's Manual

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
Page
39
of
45
Confidential and Proprietary
APPENDIX A: ENGINEERING INTERFACE - MOJO
Mojo provides users with an integrated interface for both configuration and execution of the system. The
functions of this interface are summarized as follows:
• STAR Parameter Configuration
• eNode Configuration
• Inventory Program Generation
• System Operation
To run Mojo, the user must connect to the MCON using VNC and bring up a terminal window by clicking
on the Terminal icon on the desktop. With the terminal window open, enter the following command to
launch Mojo:
$ Mojo<STAR ip>
This will launch the Mojo application and the user will be presented with the following screen.
Figure 36: Mojo Main Screen
From here the user must click on the “File” menu and select “Connect”. This will establish a connection
between the MojoClient application and the STAR. At this point, the user can make real-time
configuration changes. The most basic configuration to begin reading tags would be to enter one or more
eNode addresses in the “Exciters” tab as shown in the following figure.