User's Manual

STAR 3000 Installation Manual
Mojix Incorporated
www.mojix.com
[phone]
Page
40
of
45
Confidential and Proprietary
Figure 37: eNode Configuration (eNode Tab)
The address of an eNode is written on the eNode itself as the last three digits of the serial number. The
number is presented as three hexadecimal digits, for example, B89. The user must use the Enter key
when entering the eNode addresses in this window for the values to be accepted. Note, when the value is
accepted it will appear in parenthesis to the left of the text entry box.
Once the eNodes are entered, the user can return to the “Mac” tab and click on the “Start Auto Inventory”
Button in the top right corner. The Button will turn green when the system is running and the Button text
will change to “Stop Inventory”. This is how to start and stop tag reads. To view tag reads, the user must
select the “Show Packets” check box as shown in the following figure.
Figure 38: Tag Reads
Note that selecting the “Show Packets” box will redirect tag reads away from the MySQL database and to
the Mojo interface for display. Unselecting the box will return tag reads to the database. The EPC display
area at the bottom of the Mojo screen shows active tag reads.