User's Manual Part 2

60
STARex MANUAL
3.1.5 2ND RECEIVE ANTENNA MODE
3.1.6 PHYSICAL LAYER SETTINGS
In this section there are two options available, none and auto:
- None: No 2nd receive antenna.
- Auto: Automatically generated conguration to cycle through all antennas not currently transmitting.
To save the conguration click on the “Save” button, to discard any changes and go back to the last conguration click on the “Cancel” button. The buttons
are at the very top of the page.
This section allows the user to select different options for the physical layer, there are ve combo-boxes available: Session, Target Group, Q, LF and
Modulation.
- Target Group: Default value is A
- Session: Sets the session bit to select and query. Default value is S1.
- Q: Number of slots 2Q. Default value is 5
- LF: Tag backscatter rate. Default value is 256 kHz
- Modulation: Select a Modulation. Available values: M2, M4, M8 and FM0. Default value is Miller-4.
To save the conguration click on the “Save” button, to discard the changes and go back to latest conguration click on the “Cancel” button. Both buttons
are at the very top of the page.
RFID SETTINGS 2nd Receive Antenna Mode & Physical Layer SettingsCHAPTER III: RFID SETTINGS