User's Manual

30
Property Comment Example
aiaDottedIP, aiaName Network address and reader name 192.168.77.100, ‘aia109’
posXFt The X position (ft) of the STAR reader 0.0
posYFt The Y position (ft) of STAR reader 0.0
posZFt The Z position (ft) of STAR reader. The ground is usually
chosen to have a z coordinate of 0, so this represents the
height of the reader.
5.0
boresightCoazDeg Coazimuth, in degrees, of the direction the reader is pointing.
This is the usual math convention on angle, where +x is 0deg,
+y is 90deg, -x is 180deg, -y is 270deg
0 (reader pointed along
x-axis)
boresightElevDeg Elevation, in degrees, of the direction the reader is pointing. If
eNode points horizontally, will be zero
0 (horizontally pointed
star)
boresightRollDeg Roll angle, in degrees, of the reader. If the power cord is
down, the roll is 180deg. If up, 0 deg
180.0
Table 10: STAR Receiver Location Configuration Parameters
Property Comment Example
txID ENode ID in hex 0xa01
posXFt The X position (ft) of the eNode 0.0
posYFt The Y position (ft) of STAR reader 0.0
posZFt The Z position (ft) of eNode. The ground is usually chosen to
have a z coordinate of 0, so this represents the height of the
reader.
5.0
boresightCoazDeg Coazimuth, in degrees, of the direction the eNode is pointing.
This is the usual math convention on angle, where +x is 0deg,
+y is 90deg, -x is 180deg, -y is 270deg
0 (eNode pointed along
x-axis)
boresightElevDeg Elevation, in degrees, of the direction the eNode is pointing. If
eNode points horizontally, will be zero
0 (horizontally pointed
eNode)
Table 11: eNode Location Configuration Parameters