User's Manual

Appendix C: Advanced Troubleshooting

C.1 Accessing the Command Line

For advanced conﬁguration working beyond the web interface of the MCON, users will need an SSH Client, a VNC

Client and an FTP Client capable of using the SFTP protocol. The following list provides 3 suggested utilities and

corresponding links.

1. SSH Client – PuTTY:

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

2. VNC Client – RealVNC: http://www.realvnc.com/

3. FTP Client – Filezilla: http://ﬁlezilla-project.org/

C.2 Additional Ways to Change MCON Network Settings

To change the IP of the MCON, the user will need to establish an SSH connection (TCP port 22) with the MCON. The

ﬁrst time a user connects with the MCON, the user will be asked to agree to accept a host key for the connection that

will be cached in the registry from that point further. When asked, click on “Yes” or simply agree, depending on which

type or Client is being used. The ﬁgure below shows an example of this conﬁrmation dialog window.

Figure 35: SSH Host Key Conﬁrmation

To connect to the MCON, use the following credentials.

Username: edison

Password: m0j1xInc

Once connected, the user is presented with a command prompt. At the prompt, enter the following command:

$ sudo setup

The user will be presented with an interface that allows for the conﬁguration of several parameters as shown in the

following ﬁgures.