Installation Instructions

C
-65 Installation Guide 7
Table 2-2. LED Details for C-65 in WIPS Mode
Power LAN1
2.4
GHz
5 GHz
Description
Off
Solid
Green
Solid
Green
Solid
Green
Powered on and is working normally. The
AP is connected to the server.
Off
Slow
Blink
Green
Slow
Blink
Green
Any
Upgrade is in progress.
Solid
Orange
Off
Any
Any
Unable to get Ethernet link.
Solid
Orange
Fast
Blink
Green
Any
Any
Did not receive a valid IP address via the
DHCP.
Solid
Orange
Slow
Blink
Green
Any
Any
Unable to connect to the server.
Off Off Off Off
Not powered on or it is in the process of
starting up.
Off
Solid
Green
Slow
Blink
Green
Solid
Green
Prevention is in progress on 2.4GHz radio
Off
Solid
Green
Solid
Green
Slow
Blink
Green
Prevention is in progress on 5 GHz radio
Off
Solid
Green
Fast
Blink
Green
Solid
Green
Troubleshooting is in progress on 2.4 GHz
radio
Off
Solid
Green
Solid
Green
Fast
Blink
Green
Troubleshooting is in progress on 5 GHz
radio.
The rear panel of the C-65 has an Ethernet port labeled LAN1, that enables you to connect the device a wired
LAN through a switch or a hub and provides the power for the device by using the 802.3af standard.
Note: If the channels for monitoring and prevention are not specified on the sensor radio, then the respective LED
will have no activity and it will not glow.