User's Guide

AirTight Management Console User Guide
142
Edit SNMP Trap Destination Server
Click the SNMP trap destination server IP address and port hyperlink in the list of SNMP trap desitnation
servers. Make the necessary changes. Click OK to save the changes.
Delete SNMP Trap Destination Server
Click the Delete hyperlink for the SNMP trap destination server to delete the server. Once deleted from
the list, the events will not be sent to this server.
Copy SNMP Settings to Another Server
You can copy the SNMP settings from one server to another server when both servers are part of the
same server cluster. You can copy SNMP settings from child server to child server, parent server to child
server, or child server to parent server. You must be a superuser or an administrator to copy policies from
one server to another.
To copy SNMP settings, do the following.
1.
Go to Configuration>ESM Integration>SNMP on the parent server.
2. Click Copy Policy. The Copy Policies dialog box appears.
3. Select the server from which the SNMP settings are to be copied.
4. Select the server to which the SNMP settings are to be copied.
5. Click OK to copy the SNMP settings,
Manage WLAN Integration
WLAN Integration
AirTight WIPS integrates with the underlying WLAN infrastructure. It supports integration with controller
devices from Aruba, Cisco, Meru and HP.
You must configure the integration parameters for the appropriate vendor so that AirTight WIPS is able to
provide effective wireless intrusion prevention.
On successful configuration, AirTight WIPS server fetches data from the configured controllers. This data
includes list of managed and unauthorized devices (APs and Clients) and their association and RSSI
values detected and maintained by the controllers.
To enable integration with HP MSM and provide the parameters for integration with HP MSM controller,
see Manage Integration with HP MSM Controller
.
To configure the parameters for integration with Cisco WLC, see Manage Integration with Cisco WLC.
To configure the parameters for integration with Aruba Mobility Controllers, see Manage Integration with
Aruba Mobility Controllers
To configure the parameters for integration with Meru, see Manage Integration with Meru
Manage Integration with Aruba Mobility Controllers
You can configure AirTight Management Console to integrate with Aruba Mobility Controllers to fetch
wireless device details and RSSI information from the Aruba Mobility Controllers and help to manage the
WLAN infrastructure. This is done using the Configuration>WIPS>WLAN Integration>Aruba option.