User's Guide

Devices
169
The following table describes the device properties.
Field Description
Currently
Active?
State of the AirTight device. Yes indicates that the device is active, and No
indicates that the device is inactive.
Name
Name of the AirTight device.
MAC Address
A unique 48-bit address of the AirTight device/ 802.11 PHY modes used by
the AirTight device.
Device Tag
Text that provides additional information about the AirTight device.
Country of
Operation
Country in which the AirTight device operates.
Model
AirTight device model number.
IP Address
IP address of the AirTight device.
Device
Template
Device template applied to the AirTight device.
Location
Location of the AirTight device.
Placed on Floor
map?
Specifies whether the AirTight device has been placed on the floor map layout
for the location.
Up/Down Since
Date and time since the AirTight device is up or down.
Channel Scan
Capability (a)
802.11a channels that the AirTight device is configured to scan. This field is
populated based on the country of operation of the AirTight device.
Channel Defend
Capability (a)
802.11 a channels that the AirTight device is configured to defend. This field
is populated based on the country of operation of the AirTight device.
Channel Scan
Capability (b/g)
802.11 b/g channels that the AirTight device is configured to scan. This field
is populated based on the country of operation of the AirTight device.
Channel Defend
Capability (b/g)
802.11 b/g channels that the AirTight device is configured to defend. This
field is populated based on the country of operation of the AirTight device.
Channel Scan
Capability
(Turbo a)
Turbo 802.11a channels that the AirTight device is configured to scan. This
field is populated based on the country of operation of the AirTight device.
Channel Scan
Capability
(Turbo b/g)
Turbo 802.11b/g channels that the AirTight device is configured to scan. This
field is populated based on the country of operation of the AirTight device.
Software Build
Build number of the software on the device.
First Detected
At
Date and time when the AirTight device was first detected by the server.
Operating Mode
Mode in which the device is currently operating. The AirTight device could
operate either as an AP or as a sensor, depending on the device template
applied to it.
Capability
802.11 protocol used by the AirTight device – 802.11a, 802.11b only,
802.11b/g, or 802.11a/b/g, with or without 802.11n capability.
SSIDs
configured
SSIDs configured for the AirTight device on a radio. This field repeats for each
radio.
Device Specific
Customization
This field is visible only if the Airtight device is in an exclusively AP mode or in
AP mode with background scanning enabled. You can override the device
template settings if the per device configuration is enabled on the device
template applied to the AP, and customize the settings. Double-click here to
customize theradio settings such as Operating Channel, Custom Transmit
Power, and the mesh node settings for the AP Refer to Customize Device