User's Guide

AirTight Management Console User Guide

170

Template Settings for more details.

Additional

VLAN

Monitoring

Customized additional VLAN monitoring settings. You can customize the

additional VLANs monitored and override the additional VLANs monitored by

the device and customize the settings. Double-click here to customize the

additionally monitored VLANs. Refer to Customize Device Template Settings

for more details.

Is Mesh Root

Node (Radio

<number>)?

Indicates whether or not radio 1 for the AP is in a mesh wireless network and

the AP is a root node .

'Yes' indicates that the AP is a root node. You can edit this field only if the

device template applied to this device has per device customization enabled

on it. You can select 'Yes'only if the radio has a mesh profile attached to it.

'No' indicates that the AP is a non-root node.

Edit Device Properties

Some device properties are editable, others are not. To edit a device property, double-click it, edit it and

save the new value.

Customize Device Template Settings

You can customize and override some settings for a device applied through the device template, if you

have selected the Allow Device Specific Customization check box when defining the device template.

You can customize the radio settings and the additional VLANs monitored in the device properties of the

device.

You can customize the radio settings for an AirTight device operating in the AP mode, by modifying the

radio settings in the Device Properties.

These settings override the settings done through the device template applied to the AirTight device.

To customize the radio settings, do the following.

Click Devices.

2. Select the AirTight Devices tab.

3. Go to Device Properties.

4. Double-click the Radio Settings in Device Properties. You can customize the operating channel

and/or the transmit power of the radio.