User's Guide

AirTight Management Console User Guide
198
Security
Security standard such as Open, WEP, WPA, 802.11i, or Unknown,
applied to the AP. This is derived from the template applied to the AP.
Location
Location of the AP.
Network
Network to which AP is connected.
Up/Down Since
Date and time since which the AP is up or down.
Networked Status
Indicates whether or not the AP is in the network.
Vendor
Name of the AP vendor.
Is Banned
Indicates if the AP is a banned AP.
Quarantine Status
Indicates if the AP is quarantined.
First Detected At
Date and time on which the AP was first detected.
Encryption
Encryption protocol used by the AP.
Troubleshooting
Indicates if troubleshooting is in progress for the AP.
MFP/11w
Indicates if MFP/11w is enabled on the AP.
Authentication
Authentication Protocol used by AP.
Classification
Classification of the AP.
Manually Classified
Indicates if the AP is manually classified.
View AP Properties
Select an AP and view its properties. Some AP properties are editable, others are not. To edit an AP
property, double-click it, edit it and save the new value.
The following table provides a field-wise description of the AP properties.
Field Description
Name
Name of the AP.
Classification
Specifies whether the AP is categorized as Authorized,External,or Rogue.
Uncategorized indicates that the AP has not been categorized.
Location
AP location.
Is Placed
Specifies whether the AP has been placed on a layout for a location.
MAC Address
Unique 48-bit address of the AP/ 802.11 PHY modes used by the AP.
Protocol
Wireless protocol version used by the AP to provide wireless connectivity.
Capability
Operation mode capabilities of the device like 802.11n, 802.11ac, Super
AG, Turbo etc
SSID
SSID of the WLAN to which the AP is connected.
Is Guest
Specifies whether the AP is a guest AP or not.
Device Tag
Text that provides additional information about the AP; for example,
Hawaii Conference Room, Bldg 15 – Cubicle G2.
IP Address
IP address if the AP is authorized. The field is blank if the AP is rogue or
external.
Network
Network tag of the network to which the AP is connected. This value is
blank if the AP is not connected to a network.
Vendor Name
Name of the AP vendor.
First Detected At
Date and time when the AP was first detected by the system.
Up Since
Date and time since which the AP is up.
Channel
Channel number on which the AP operates.