User's Guide

AirTight Management Console Configuration
33
Activate intrusion prevention for a location using the Configuration>WIPS>Intrusion Prevention
Activation option. The following figure explains intrusion prevention activation.
Intrusion Prevention Activation
The intrusion prevention policy is a location specific policy - it cannot be inherited from the parent
location.
Authorized APs should be in the Authorized folder before activating intrusion prevention. Their network
connectivity icon may show the status as Wired, Unwired, or Indeterminate.
If you deploy new Authorized APs later, you do not have to deactivate intrusion prevention. However, you
need to ensure that the newly deployed APs are moved to the Authorized folder.
AirTight recommends that you select the Activate Intrusion Prevention for <location> check box for
the selected location only after the deployment is stable and fully configured. If you are modifying a
deployment, clear the Activate Intrusion Prevention for <location> check box to avoid spurious activity
during the transient phase.
Click Save to the change. Click Cancel to cancel the change. Click Restore Defaults to restore the
default value.
Import Device List