User's Manual

ServerȱandȱSensorȱOverviewȱ
SpectraGuard
®
ȱEnterpriseȱInstallationȱGuideȱ
6ȱ
High
Availability
Interface
Used to connect the Server to a
high availability cluster
RJ-45
Settings: 10/100/1000
Mbps
Protocol: Ethernet
Network
Interface
Used to connect the Server to the
wired LAN through a hub or a
switch
Allows the Server to talk to
Sensors
RJ-45
Settings: 10/100/1000
Mbps
Protocol: Ethernet
ȱ
3.3 FrontȱPanelȱofȱSensorȱ
3.3.1 SensorȱSSȬ200ȬATȱ
TheȱfrontȱpanelȱofȱtheȱSensorȱhasȱLEDsȱthatȱindicateȱtheȱworkingȱofȱtheȱSensor.ȱ
ȱ
Figure 5. Front Panel of Sensor SS-200-AT
TheseȱLEDsȱareȱdescribedȱinȱtheȱfollowingȱtable.ȱ
Table 4. LED details for Sensor SS-200-AT and SS-300-AT
LED1 or
Power
LED2 or
LAN
LED3 or
802.11a
LED4 or
802.11
b/g
Description
Solid
Green
Solid
Green
Solid
Green
Solid
Green
The Sensor is receiving power and is
working normally. The Sensor is
connected to the Server.
Solid
Green
Solid
Green
Solid
Green
Fast Blink
The Sensor is performing Troubleshooting
on 802.11b/g.
Solid
Green
Solid
Green
Solid
Green
Slow Blink
The Sensor is performing Intrusion
Prevention on 802.11b/g.
Solid
Green
Solid
Green
Fast Blink
Solid
Green
The Sensor is performing Troubleshooting
on 802.11a.
Solid
Green
Solid
Green
Fast Blink Fast Blink
The Sensor is performing Troubleshooting
on 802.11a and 802.11b/g.
Solid
Green
Solid
Green
Fast Blink Slow Blink
The Sensor is performing Troubleshooting
on 802.11a and Intrusion Prevention on
802.11b/g.
Solid
Green
Solid
Green
Slow
Blink
Solid
Green
The Sensor is performing Intrusion
Prevention on 802.11a.
Solid
Green
Solid
Green
Slow
Blink
Fast Blink
The Sensor is performing Intrusion
Prevention on 802.11a and
Troubleshooting on 802.11b/g.
Solid
Green
Solid
Green
Slow
Blink
Slow Blink
The Sensor is performing Intrusion
Prevention on 802.11a and 802.11b/g.
Solid
Green
Slow Blink
Slow
Blink
Slow Blink The Sensor upgrade is in progress.