User's Manual

InstallingȱtheȱServer ȱ

SpectraGuard

ȱEnterpriseȱInstallationȱGuideȱ

4.2.1 AccessingȱtheȱServerȱusingȱSSHȱ(Recommended)ȱ

ToȱaccessȱtheȱServerȱusingȱSSH,ȱperformȱtheȱfollowingȱsteps:ȱ

1. ConnectȱyourȱcomputerȱtoȱtheȱsameȱsubnetȱwhereȱtheȱServerȱisȱconnected.ȱ

Note:ȱTheȱdefaultȱIPȱaddressȱofȱtheȱServerȱisȱ192.168.1.246.ȱ

2. Changeȱyourȱcomputer’sȱIPȱaddressȱtoȱ192.168.1.XXX,ȱforȱexample,ȱ192.168.1.244.ȱ

3. OpenȱSSHȱonȱyourȱcomputerȱandȱpressȱ<Enter>ȱorȱ<Space>ȱonȱtheȱSSHȱSecureȱShellȱdialog.ȱ

4. AccessȱtheȱdefaultȱServerȱIPȱaddress,ȱ192.168.1.246ȱasȱshownȱinȱtheȱfollowingȱfigure.ȱ

Figure 13. Open SSH

5. LoginȱusingȱtheȱUsername:ȱconfigȱandȱPassword:ȱconfig.ȱ

4.2.2 AccessingȱtheȱServerȱusingȱaȱSerialȱCableȱ

Alternatively,ȱyouȱcanȱaccessȱtheȱServerȱusingȱaȱSerialȱRSȬ232ȱcableȱasȱshownȱinȱtheȱfollowingȱfigureȱandȱthenȱfollowingȱtheȱ

stepsȱlistedȱbelowȱtheȱfigure.ȱ

Figure 14. Connect the Server to your Computer using a Serial Cable