User's Manual

ConfigȱShellȱCommandsȱ

SpectraGuard

ȱEnterpriseȱInstallationȱGuideȱ

8.2 SensorȱConfigȱShellȱCommandsȱ

get Commands

Command Description

get ap Displays all the currently visible APs

get interface Displays Network Interface speed and mode

get ip config Displays the IP information

get log Displays the log information as it is created

get log config Displays the configuration of the logger

get mode Displays the mode in which the Sensor is currently configured

get rf Displays if RF monitoring for a Sensor is ‘ON’ or ‘OFF’

get serial num Displays the Board Number

get server discovery Displays the Server discovery/setting information

get status Displays the current running status of all the components

get version

Displays the version and build information of all the

components

get vlan config Displays the VLAN information (set info and dynamic info)

get vlan id Displays the VLAN IDs seen by the ND

get vlan status Displays the VLAN status information

get model Displays the Sensor Model

set Commands

Command Description

set erase Sets the erase character to ^H

set interface Sets Network Interface speed and mode

set ip config Runs through the current VLAN and IP config wizard

set server discovery Sets the Server discovery information

set vlan config Sets multiple VLAN monitoring to ‘ON’ or ‘OFF’

set mode

Sets the mode to Sensor, Sensor/ Network Detector Combo,

Network Detector, or Sentry