User's Manual

ServerȱandȱSensorȱOverviewȱ
SpectraGuard
®
ȱEnterpriseȱInstallationȱGuideȱ
5ȱ
Table 2. Front Panel LEDs
LED LED Color Meaning of LED
Solid Green
Indicates that the Server is powered on and working
normally
Power
Off
Indicates that the Server is not powered on or not
receiving power
Blinking
Green
Indicates that the hard disk drive is being accessed
Hard Disk
Off Indicates that the hard disk drive is not being accessed
Blinking
Green
Indicates that the Server is connected to the network
Network Interface
Card
Off
Indicates that the Server is not connected to the
network
Blinking
Green
Indicates that the Server is a part of a high availability
cluster High Availability
Interface
Off
Indicates that the Server is not a part of a high
availability cluster
ȱ
3.2 RearȱPanelȱofȱtheȱServerȱ
TheȱrearȱpanelȱofȱtheȱServerȱhasȱaȱpowerȱconnectorȱandȱportsȱthatȱenableȱyouȱtoȱpowerȱupȱtheȱServerȱandȱconnectȱitȱtoȱtheȱ
networkȱandȱaȱcomputer.ȱ
Note:ȱOtherȱconnectorsȱsuchȱasȱparallelȱport,ȱ25ȬȱpinȱSerialȱport,ȱkeyboardȱconnector,ȱsoundȱcard,ȱandȱsoȱonȱareȱshownȱinȱ
theȱfollowingȱ
figure.ȱHowever,ȱtheseȱconnectorsȱareȱdisabledȱandȱcannotȱbeȱused.ȱ
ȱ
Figure 4. Rear Panel of the Server
TheȱrearȱpanelȱofȱtheȱServerȱhasȱaȱSerialȱ(RSȱ232ȱFȬF)ȱport,ȱaȱNetworkȱInterfaceȱportȱ(RJȬ45ȱ10/100/1000ȱEthernet),ȱaȱHighȱ
Availabilityȱ(HA)ȱportȱ(RJȬ45ȱ10/100/1000ȱEthernet),ȱandȱaȱPowerȱconnector.ȱTheȱPowerȱconnectorȱisȱusedȱtoȱpowerȱtheȱServerȱ
usingȱ110Ȭ240Vȱ50/60ȱHzȱACȱinput.
ȱTheȱfollowingȱtableȱdescribesȱtheȱSerial,ȱNetworkȱInterface,ȱandȱHighȱAvailabilityȱports.ȱ
Table 3. Rear Panel Ports
Port Description
Connector
Type
Settings/Protocol
Serial
Enables a serial (RS-232)
connection to establish terminal
sessions using terminal emulation
programs such as HyperTerminal
for Windows or minicom for Linux
DB-9
Settings:
Bits per second: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Protocol: RS-232