User's Manual

ServerȱandȱSensorȱOverviewȱ
SpectraGuard
®
ȱEnterpriseȱInstallationȱGuideȱ
10ȱ
ȱ
TheȱsideȱpanelȱofȱtheȱSensorȱSSȬ300ȬATȱhasȱaȱResetȱSwitchȱandȱaȱSerialȱPort.ȱȱ
ȱ
Figure 9. Side Panel of Sensor SS-300-AT
Theȱsideȱpanelȱhasȱtheȱfollowingȱports:ȱ
x Serialȱport:ȱConnectsȱtheȱSensorȱtoȱserialȱterminalȱemulationȱprogramsȱsuchȱasȱHyperȱTerminalȱforȱWindowsȱorȱ
minicomȱforȱLinuxȱ
x Resetȱswitch:ȱResetsȱtheȱSensorȱtoȱfactoryȱdefaults.ȱToȱresetȱtheȱSensor,ȱpressȱtheȱResetȱswitchȱandȱpowerȱcycleȱ
(removeȱtheȱpower
ȱcable
ȱonceȱandȱconnectȱitȱbackȱagain)ȱtheȱSensorȱtillȱallȱLEDsȱblinkȱgreen.ȱPressingȱ<Reset>ȱwhileȱ
theȱSensorȱisȱrunningȱwillȱnotȱhaveȱanyȱeffect.ȱTheȱfollowingȱsettingsȱareȱreset:ȱ
¾ ConfigȱShellȱPasswordȱisȱresetȱtoȱconfig.ȱ
¾ ServerȱDiscoveryȱvalueȱisȱerasedȱandȱchangedȱtoȱtheȱdefault,ȱwifi
ȬsecurityȬserver.ȱ
¾ AllȱtheȱVLANȱconfigurationsȱareȱlost.ȱ
¾ SensorȱmodeȱisȱchangedȱtoȱSensorȱOnly.ȱ
¾ IfȱstaticȱIPȱwasȱconfiguredȱonȱtheȱSensor,ȱtheȱIPȱisȱerasedȱandȱDHCPȱmodeȱisȱset.ȱ
Afterȱreset,ȱallȱtheȱLEDsȱwillȱblinkȱonce,ȱimplyingȱthatȱtheȱreset
ȱisȱsuccessful.ȱ
Table 8. Side Panel Port Settings for SS-300-AT
Port Description Connector Type Speed/Protocol
Reset Allows resetting of
SpectraGuard Sensor™ to
factory settings.
Pin-hole
push-button
Hold down and power
cycle the Sensor to
reset
Console Enables a serial connection to
establish terminal sessions.
Used for launching Config Shell
sessions.
RJ-45 RS 232 Serial
Bits per second:
115200
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None