User's Manual

SettingȱupȱtheȱServerȱConsoleȱ

SpectraGuard

ȱEnterpriseȱInstallationȱGuideȱ

60ȱ

7.1.5.4 ImportingȱaȱPlannerȱfileȱintoȱaȱLocationȱNodeȱ

Theȱsystemȱenablesȱyouȱtoȱspecifyȱaȱlayoutȱforȱeachȱlocationȱnodeȱusingȱaȱblankȱcanvas,ȱaȱlayoutȱimage,ȱorȱaȱ.SPMȱfileȱexportedȱ

fromȱPlanner.ȱUseȱtheȱfollowingȱstepsȱtoȱimportȱaȱPlannerȱfile:ȱ

a. InȱtheȱLocationȱtree,ȱselectȱtheȱlocationȱnodeȱintoȱwhichȱyouȱwishȱtoȱimportȱthe

ȱ.SPM

ȱfileȱandȱthenȱrightȬclick.ȱ

b. Doȱoneȱofȱtheȱfollowing:ȱ

x FromȱtheȱresultingȱcontextȬsensitiveȱmenu,ȱselectȱImportȱLocation.ȱ

x ClickȱtheȱImportȱLocationȱiconȱ(

)ȱbelowȱtheȱViewerȱmodeȱtab.ȱ

c. InȱtheȱSelectȱSpectraGuardȱPlannerȱ(.spm)ȱFileȱdialog,ȱbrowseȱtoȱtheȱappropriateȱPlannerȱexportedȱ.SPMȱfileȱandȱthenȱ

clickȱ<Open>.ȱ

16. TheȱLocationsȱscreenȱappearsȱasȱshownȱinȱtheȱfollowingȱfigure.ȱYouȱcanȱplaceȱSensorsȱonȱtheȱfloormapsȱbyȱdraggingȱandȱ

droppingȱthem.ȱIfȱyou

ȱhaveȱimportedȱanȱSPMȱfileȱfromȱPlannerȱthatȱcontainsȱfloorȱinformationȱandȱSensorȱplacements,ȱ

Sensorsȱcontainedȱinȱthatȱfileȱwillȱbeȱplacedȱautomatically.ȱ

Figure 87. Placing Sensors on the Floormap

YouȱmustȱcompleteȱthisȱstepȱtoȱviewȱliveȱRFȱcoverageȱmapsȱforȱaȱlocationȱnodeȱandȱperformȱonȬfloorȱlocationȱtrackingȱofȱ

visibleȱ802.11ȱdevices.ȱUseȱtheȱfollowingȱstepsȱtoȱplaceȱSensorsȱonȱtheȱfloormap:ȱ

a. InȱtheȱLocationȱtree,ȱselectȱaȱlocationȱnode.ȱ

b. UnderȱAvailableȱDevices,ȱselectȱtheȱSensorsȱtab,ȱ

thenȱdragȱandȱdropȱtheȱSensorsȱonȱyourȱfloormap.ȱ

7.1.6 Stepȱ6:ȱClassifyingȱAPsȱ

17. TheȱAuthorizedȱWLANȱSetupȱscreenȱappearsȱasȱshownȱinȱtheȱfollowingȱfigure.ȱOnȱthisȱscreen,ȱspecifyȱAuthorizedȱAPȱ

detailsȱusingȱSSIDȱtemplatesȱtoȱsuitȱdifferentȱlocations.ȱ