APP Guide V1.0

LW007-PIR
3 www.mokosmart.com
1 About this Manual
The purpose of this manual is to outline how to use MKLoRa APP for LW007-PIR parameters
configuration.
2 MKLoRa APP
For the detailed operation of the MKLoRa app to configure and read device information, please
refer to the following instructions:
2.1 Install MKLoRa APP
User can get the APP download link by search“MKLoRa”in your phone APP store: Please allow
Bluetooth to be enabled during the installation process. This APP communicates with the device
via Bluetooth, and it only supports above android 4.4 and IOS 9.0 system.
Note: After the successful installation of the APP, the APP will request some mobile phone
permissions, such as Bluetooth access permissions. Please click "OK", otherwise the APP will not
work well.
2.2 Connect to LW007-PIR
After the device is turned on, the device Bluetooth will start broadcasting. Open the MKLoRa APP
and choose LW007-PIR on device option interface, then you can search the LW007-PIR device by
click the refresh icon. The default broadcast name of the device: LW007-PIR-XXXX(XXXX is the last
4 bit of device MAC address).
The Edit Filter at the top can help user filter the keywords and RSSI. RSSI ranges from -127dBm to
0dBm;
Note: If a password is not entered within one minute, the login box
will disappear, you should click “CONNECT” again.
Note: If there is no action within 3 minutes after login, the system will
automatically login out.
The distance between the phone and the device should be kept within
10m without wall obstruction. Otherwise, the device will not be
searched. After searching for the device, click the “CONNECT” to
connect the device that you want to configure.
Then you should enter the password, the default login password is
“Moko4321”.