APP Guide V1.0

LW007-PIR
7 www.mokosmart.com
2.3.2.1 PIR Settings
2.3.2.2 Hall Settings
Function Switch: The function switch of PIR detection. The
default is ON.
Report Interval: Information Payload reporting interval when
PIR is continuously triggered. The default is 10, the unit is
minute.
The value ranges from 10 -60 mins.
PIR Sensitivity: Users can adjust the trigger sensitivity according
to different scenarios, so as to adjust the monitoring range. The
default is Medium.
It can be set as Low or medium or High.
Function Switch: The function switch of door/window status
detection. The default is ON.
Door Status: The current door/window status.
Total Trigger Times: Cumulative number of triggers for the
door/window status detection function.
Reboot/Reset/Change battery will set the total trigger times to 0.
PIR Delay Time: Users can adjust the PIR delay time according to different scenarios, so as to adjust
the minimum sample frequency of PIR monitoring. The default is Medium.
It can be set as Low or medium or High.
PIR Status: The current motion/occupancy status of monitored area.