Specifications V1.1

MOKO LoRaWAN Gateway
MKGW2-LW
www.mokosmart.com
5
2.4 Hardware Interfaces
Figure2 MKGW2-LW Interface
Table 4 MKGW2-LW Hardware Interfaces
No.
Type
Function
Remark
1
Reset button
1.Reset to factory
setting
2.Firmware upgrade
1.Reset: Insert and press the button then keep
5s
2.Update: Before firmware upgrade, insert USB
Flash Drive and short press the button
2
USB Port
Plug a USB flash drive
with upgrade file for
firmware upgrade
The name of upgrade file is required to be:
MKGW2-LW-Upgrade.bin
3
POE Port
1.POE power supply
2.Ethernet Access
POE (IEEE 802.3af), 42~57VDC
4
Micro USB
USB power supply
5V/2A
5
DC Power Port
DC power supply
12V/1A
6
Power Button
ON/OFF
7
WiFi Antenna
WiFi Antenna
1.1dBi External antenna
8
LoRa Antenna
LoRa Antenna
1.6dBi External antenna
9
Power LED
Indicate device
operating status
1.System operating normally: Solid green
2.System operating abnormally: Solid red
3. System upgrade: Blink green
10
Network LED
Indicate network status
1.No network: Solid yellow
2.ETH connection: Solid blue
3. WIFI connection: Solid green
11
Communication
LED
Indicate Lora and server
communicate status
1.LoRa COMM √, Server COMM ×: Solid blue
2.LoRa COMM x, Server COMM √: Solid yellow
3.LoRa COMM √, Server COMM √ : Solid green
4.LoRa COMM x, Server COMM x: Solid red