Data Sheet

2. Turn off the device via MKLoRa APP
3. Turn off the device via LoRa Downlink Command
4.4 How to connect to APP and configure parameters
Please download “MKLoRa” APP from app store directly. For more configuration details,
please refer to document - “LW001-BG PRO User Manual”.
5 General Function
5.1 Multiple Working Mode
5.1.1 Overview
LW001-BG PRO supports four different working modes: Standby Mode, Timing Mode, Periodic
Mode and Motion Mode.
LW001-BG PRO can only be in one mode at the same time, and the user can use the mobile app or
LoRa downlink command to switch the working mode.
No matter what mode the device is, Heartbeat Payload will be sent according to Heartbeat
Interval (The Heartbeat interval can be set by user). If other uplink payload is sent during the
Heartbeat Interval, the Heartbeat Interval will be recalculated with the uplink time point of that
payload.
Along to the main working mode, LW001-BG PRO can perform extra operations known as Auxiliary
Operations.
5.1.2 Standby Mode
In Standby Mode, the device will only report Heartbeat Payload according to Heartbeat Interval
and will not send the Location Payload which includes LW001-BG PRO’s positions.