Data Sheet

5.2.4 ManDown Detection
When the LW001-BG PRO is used to track large machinery and equipment or livestock, the
LW001-BG PRO's built-in three-axis sensor can detect whether the equipment or livestock being
tracked is stationary for a long time.
If the preset ManDown detection condition is reached, LW001-BG PRO will report the ManDown
Detection Payload to remind the user to arrange the equipment usage or check the grazing status
of the livestock in time.
5.2.5 Active State Count
The product's activity can be detected by the product's built-in three-axis sensor.
Whenever the state of the LW001-BG PRO changes stationary to motion, the activity count will be
increased by one. One or more moves within Activity State Timeout will be judged as one activity,
and Activity State Timeout can be set according to different application scenarios.
Each Heartbeat Payload will contain the number of activities between the time the last Heartbeat
Payload was reported and the time the current heartbeat packet was sent.
5.2.6 Tamper Alarm
The LW001-BG PRO has tamper alarm function.
When LW001-BG PRO is abnormally removed from the installation location, the tamper button
will pop up, LW001-BG PRO will flash the alarm alert and send the Tamper Alarm Payload to the
server to remind the user. Users can use Downlink for Position function to request for location
information to secure the tracked assets.