Data Sheet

Vibration judgment condition is suitable for Vibration Detection.
5.7 Local Data Sync
LW001-BG PRO Built-in 4M FLASH memory chip, can support 20,000 pieces of data local storage at
most. All data uploaded by the device is stored in the device.
Users can read data of the past 1 day, 7 days, 1 month, 3 months, 6 months, 1 year or custom days
via Bluetooth or downlink command.
When the LoRaWAN network has problems or data loss is severe, users can quickly get the
historical reporting data from the device.
5.8 Battery Performance
The LW001-BG PRO is equipped with 3*AA non-rechargeable battery (ER14505).
According to the operating voltage requirement of each component, the total actual power
available is about 6500mAH. Based on this, the endurance of the device is about 4.5 years under
typical scenarios (WIFI scan for 5 seconds, Bluetooth scan for 5 seconds and GPS positioning for 3
minutes every day).
Users can use LoRa downlink commands to have the device send Battery Consumption Payload
and calculate the approximate power consumption.
5.8.1 Low battery Alert
When LW001-BG PRO's battery level is low, its power indicator will flash every 10s and it will
report Low Power Payload to the server as a prompt.
Notes: Low battery threshold can be to set 5% and 10%. User can also choose not to blink the LEDs
and not to report the shutdown payload.
5.8.1 Shutdown message reminder
LW001-BG PRO supports sending the shutdown payload as a notification alert when the device is
turned off. Users can choose to turn off this feature.
Note: If the battery is suddenly disconnected or pulled out, the device cannot send the shutdown
payload.
5.9 Time Synchronization
There are four methods to sync time of LW001-BG PRO.