Data Sheet

 Take measures to protect the unit against static electricity. If pulses or other
transient loads (a large load applied in a short time) are applied to the products,
check and evaluate their operation before assembly on the final products.
 The supply voltage should not be exceedingly high or reversed. It should not
carry noise and/or spikes.
 This product away from other high frequency circuits.
 Keep this product away from heat. Heat is the major cause of decreasing the
life of these products.
 Avoid assembly and use of the target equipment in conditions where the
products' temperature may exceed the maximum tolerance.
 This product should not be mechanically stressed when installed.
 Do not use dropped products.
 Do not touch, damage or soil the pins.
 Pressing on parts of the metal shield or fastening objects to the metal shield will
cause damage.
6.3 Storage Notes
 The module should not be stressed mechanically during storage.
 Do not store these products in the following conditions or the performance
characteristics of the product, such as RF performance will be adversely
affected:
o Storage in salty air or in an environment with a high concentration of
corrosive gas.
o Storage in direct sunlight
o
Storage in an environment where the temperature may be outside the
range specified.
o Storage of the products for more than one year after the date of delivery
storage period.
 Keep this product away from water, poisonous gas and corrosive gas.
 This product should not be stressed or shocked when transported.