How-To Guide

1.Afer MQTT settings for APP successed,click "Add device" to choose the waiting connection
device.then enter into the "MQTT settings for device"
Differences from MQTT settings for APP:
Client id: Unique identifier for MQTT servre distinguishing device. It can't be set the same as
APP side Client Id and can't be null.
Device id: Unique identifier for APP distinguishing device and it can't be null.
Subscribed Topic and Published Topic are neccessary，If APP side is null，you can set them
everything.If APP topics have been set,you should set them according to the APP side.The
device Subscribed Topic must be consistent with APP Published Topic,and the device
Published Topic is the same as APP Subscribed Topic too.(Setting rules：APP Subscribed
Topic = Device Published Topic and APP Published Topic = Device Subscribed Topics）
2.Connect to AWS
2.1 How to connect app to AWS
1.Download MOKO Scanner from Googleplay or APP store.
2.Power on the plug and shortly press the button on plug,the indicated light will flash
green.open your MOKO Scanenr,click the upper right icon to the "MQTT settings for APP"
interface.