MSDS

12/11/2007Revision:
12/11/2007Printed:
4Page:
Mold Armor Instant Mold & Mildew Stain
Remover
MATERIAL SAFETY DATA SHEET
10/03/2007Supercedes Revision:
A source of clean water should be available in the work area for flushing eyes and skin.
Do not eat, drink, or smoke in the work area.
Wash hands thoroughly after use.
Work/Hygienic/Maintenance Practices
9. Physical and Chemical Properties
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
> 212.00 F
Autoignition Pt:
No data.
Flash Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
1.06
Bulk density:
8.84 LB/GA
Vapor Pressure (vs. Air or mm Hg):
< 0.1 MM HG
Vapor Density (vs. Air = 1):
> 1
Evaporation Rate (vs Butyl
Acetate=1):
< 1
Solubility in Water:
No data.
Completely soluble in water.
Other Solubility Notes
Percent Volatile:
N.D.
Corrosion Rate:
No data.
pH:
12 - 13
Light yellow, free and clear.
Appearance and Odor
10. Stability and Reactivity
Stability:
Unstable [ ] Stable [ X ]
No data available.
Conditions To Avoid - Instability
Incompatible with acids, ammonia, or other household chemicals. Do not mix with acids, ammonia, or other
household chemicals as dangerous fumes may result.
Incompatible with strong oxidizing and reducing agents.
Incompatibility - Materials To Avoid
Thermal decomposition may produce chlorine gas.
Hazardous Decomposition Or Byproducts
Hazardous Polymerization:
Will occur [ ] Will not occur [ X ]
No data available.
Conditions To Avoid - Hazardous Polymerization
11. Toxicological Information
No data available.
Toxicological Information
No data available.
Carcinogenicity/Other Information
Licensed to W.M. Barr and Company
ANSI Z400.1 Format