SDS

04/14/2015Revision:
04/28/2015Printed:
Page: 2
Mold Armor Instant Mold and Mildew Stain
Remover
SAFETY DATA SHEET
03/26/2015Supersedes Revision:
Hazard Rating System:
Instability
Special Hazard
Health
Flammability
HEALTH
FLAMMABILITY
PPE
PHYSICAL
2
0
0
B
1
0
0
NFPA:HMIS:
This material is classified as hazardous under OSHA regulations.
OSHA Regulatory Status:
Asthma or other pre-existing lung/respiratory illnesses.
Medical Conditions Generally
Aggravated By Exposure:
Inhalation Acute Exposure Effects:
May cause irritation of respiratory tract and irritation of mucous membranes. If sodium
hypochlorite is mixed with ammonia or other chemicals, evolution of chlorine or chlorine
based compounds results. These gases can produce pulmonary edema. NEVER MIX
WITH ANY OTHER CHEMICALS.
Skin Contact Acute Exposure Effects:
This product is a skin irritant. May cause redness and possibly inflammation of the skin.
May cause chemical burns to broken skin.
Eye Contact Acute Exposure Effects:
This material is an eye irritant.
Ingestion Acute Exposure Effects:
Liquid can be corrosive to the mouth and throat, mucous membranes and stomach.
Swallowing can burn the tissues, cause abdominal pain, nausea, vomiting, circulatory
collapse, confusion, delirium, coma, and collapse. Swallowing large quantities can
cause death.
Chronic Exposure Effects:
Prolonged or repeated contact may cause dermatitis and sensitization. May cause
constant irritation of eyes and respiratory tract.
Potential Health Effects
(Acute and Chronic):
CAS # Hazardous Components (Chemical Name)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Concentration RTECS #
7681-52-9 Sodium hypochlorite {Hypochlorous acid, sodium
salt}
< 5.0 % NH3486300
Specific percentage of composition is being withheld as a trade secret.
Additional Chemical
Information
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format