SDS

04/14/2015Revision:
04/28/2015Printed:
Page: 4
Mold Armor Instant Mold and Mildew Stain
Remover
SAFETY DATA SHEET
03/26/2015Supersedes Revision:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Precautions To Be Taken in
Handling:
Keep container tightly closed when not in use. Store in a cool, dry place. Protect from
freezing. Avoid extreme high or low temperatures.
Precautions To Be Taken in
Storing:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
No data. No data.
7681-52-9 Sodium hypochlorite {Hypochlorous
acid, sodium salt}
No data.
For OSHA controlled work place and other regular users -- Use only with adequate
ventilation under engineered air control systems designed to prevent exceeding
appropriate TLV. For occasional use, where engineered air control is not feasible, use
properly maintained and properly fitted NIOSH approved respirators. A dust mask does
not provide protection against vapors.
Respiratory Equipment
(Specify Type):
Safety glasses, chemical goggles or face shields are recommended to safeguard against
potential eye contact, irritation, or injury. Contact lenses should not be worn while
working with chemicals.
Chemcial splash goggles or safety glasses with a faceshield should be worn if the
possibility of splashing exists.
Eye Protection:
Wear impermeable gloves. Gloves contaminated with product should be discarded.
Promptly remove clothing that becomes soiled with product.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, etc., to minimize exposure. Before reuse, thoroughly
clean any clothing or protective equipment that has been contaminated by prior use.
Discard any clothing or other protective equipment that cannot be decontaminated, such
as gloves or shoes.
Other Protective Clothing:
Use only with adequate ventilation to prevent build-up of vapors. Open all windows and
doors. Use only with a cross ventilation of moving fresh air across the work area. If
strong odor is noticed or you experience slight dizziness, headache, nausea, or
eye-watering -- Stop -- ventilation is inadequate. Leave area immediately.
Engineering Controls
(Ventilation etc.):
A source of clean water should be available in the work area for flushing eyes and skin.
Do not eat, drink, or smoke in the work area.
Wash hands thoroughly after use.
Work/Hygienic/Maintenance
Practices:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format