SDS

08/05/2021Revision:
Page: 3 of 5
Mold Armor Mold Blocker
SAFETY DATA SHEET
09/01/2020Supersedes Revision:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory Equipment
(Specify Type):
Eye Protection:
Protective Gloves:
Other Protective Clothing:
Engineering Controls
(Ventilation etc.):
Work/Hygienic/Maintenance
Practices:
None required. Do not breath mists.
Safety glasses should be worn during normal handling of this material.
Where contact with the eyes or face is likely due to spraying or splashing, a faceshield or
chemical splash goggles should be worn to prevent contact.
Where contact is likely, wear chemical-resistant gloves, such as nitrile or rubber.
Use or handling of the material may dictate the need for additional protective clothing,
such as chemical-resistant aprons, suits, or boots.
None required.
Wash hands before eating, drinking, smoking, or using the restroom.
Facilities storing or utilizing this material should be equipped with an eyewash and safety
shower facility.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
Melting Point:
Boiling Point:
Flash Pt:
Explosive Limits:
Vapor Pressure (vs. Air or
mm Hg):
Vapor Density (vs. Air = 1):
Evaporation Rate:
pH:
Appearance and Odor:
Flammability (solid, gas):
[ ] Gas [ X ] Liquid [ ] Solid
N.D.
N.D.
N.D.
LEL: N.D. UEL: N.D.
N.D.
> 1
N.D.
6 - 8
Odor threshold not determined.
No data available.
Specific Gravity (Water = 1):
Solubility in Water:
1
Complete
Decomposition Temperature:
Autoignition Pt:
Viscosity:
Octanol/Water Partition
Coefficient:
N.D.
N.D.
N.D.
ND
Corrosion Rate:
Additional Physical
Information
N.D.
ND = Not determined
Licensed to W.M. Barr and Company
GHS format