Safer Choice Standard

09/01/2020Revision:
Page: 3 of 5
MA Mold & Mildew Killer + Quick Stain
Remover
SAFETY DATA SHEET
05/23/2019Supersedes Revision:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Precautions To Be Taken in
Handling:
Keep container tightly closed when not in use. Store in a cool, dry place. Protect from
freezing. Avoid extreme high or low temperatures.
Precautions To Be Taken in
Storing:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Recommended Exposure LimitsCAS # Chemical Name Jurisdiction Notations
ACGIH TLV CEIL: 2 mg/m3
1310-73-2 Sodium hydroxide
{Caustic soda; Lye solution}
OSHA PELs PEL: 2 mg/m3
Ensure adequate ventilation.
Respiratory Equipment
(Specify Type):
Eye protection recommended.
Eye Protection:
Rubber or neoprene gloves.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, etc., to minimize exposure. Before reuse, thoroughly
clean any clothing or protective equipment that has been contaminated by prior use.
Discard any clothing or other protective equipment that cannot be decontaminated, such
as gloves or shoes.
Other Protective Clothing:
Use only with adequate ventilation to prevent build-up of vapors. Open all windows and
doors. Use only with a cross ventilation of moving fresh air across the work area. If
strong odor is noticed or you experience slight dizziness, headache, nausea, or
eye-watering -- Stop -- ventilation is inadequate. Leave area immediately.
Engineering Controls
(Ventilation etc.):
A source of clean water should be available in the work area for flushing eyes and skin.
Do not eat, drink, or smoke in the work area.
Wash hands thoroughly after use.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
N.D.
Boiling Point:
N.D.
Flash Pt:
Nonflammable
Explosive Limits:
LEL: N.D. UEL: N.D.
Vapor Pressure (vs. Air or
mm Hg):
N.D.
Vapor Density (vs. Air = 1):
N.D.
Evaporation Rate:
N.D.
pH:
12 - 13.5
Clear.
Bleach odor.
Odor threshold not determine.
Appearance and Odor:
Flammability (solid, gas):
No data available.
Licensed to W.M. Barr and Company
GHS format