SDS

04/17/2015Revision:
04/27/2015Printed:
Page: 4
Mold Armor Mildew Stain Remover Plus
Blocker
SAFETY DATA SHEET
03/26/2015Supersedes Revision:
When used as directed, respiratory equipment should not be needed.
Wear NIOSH approved respiratory protective equipment when vapor or mists may
exceed applicable concentration limits.
Respiratory Equipment
(Specify Type):
Safety glasses should be worn during normal handling of this material.
Where contact with the eyes or face is likely, a faceshield or chemical splash goggles
should be worn to prevent eye contact.
Eye Protection:
Wear gloves with as much resistance to the chemical ingredients as possible. Glove
materials such as nitrile rubber and latex will provide protection. Glove selection should
be based on chemicals being used and conditions of use. Consult your glove supplier
for additional information.
Protective Gloves:
Various application methods can dictate use of additional protective safety equipment,
such as impermeable aprons, etc., to minimize exposure.
Other Protective Clothing:
Ventilation is normally not required when handling or using this product to keep exposure
to airborne contaminants below the exposure limit.
Engineering Controls
(Ventilation etc.):
Wash hands thoroughly after use and before eating, drinking, smoking, or using the
restroom.
Do not eat, drink, or smoke in the work area.
Discard any clothing or other protective equipment that cannot be decontaminated.
Facilities storing or handling this material should be equipped with an emergency
eyewash and safety shower.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
212.00 F
Autoignition Pt:
No data.
Flash Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
0.998 - 1.002
Density:
8.47
Free and clear, colorless.
Appearance and Odor:
Vapor Pressure (vs. Air or
mm Hg):
< 0.1 MM HG at 68.0 F
Vapor Density (vs. Air = 1):
No data.
Evaporation Rate:
No data.
Solubility in Water:
complete
Percent Volatile:
N.D.
pH:
8 - 10
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format