SDS

04/10/2018Revision:
04/10/2018Printed:
Page: 2
Mold Armor Pre-Paint Cleaner1
SAFETY DATA SHEET
02/15/2018Supersedes Revision:
4. FIRST AID MEASURES
Inhalation:
If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or
artificial respiration until medical assistance can be rendered.
Skin contact:
Wash with soap and large quantities of water for at least 15 minutes. Seek medical
attention if irritation from contact persists.
Eye contact:
Immediately flush eyes with water, remove any contact lens, continue flushing with water
for at least 15 minutes. Get medical attention.
Ingestion:
Drink one or two glasses of water or milk. Never attempt to give anything by mouth to an
unconscious person. Call your poison control center, hospital emergency room, or
physician immediately.
Emergency and First Aid
Procedures:
5. FIRE FIGHTING MEASURES
Flash Pt:
NA
Self-contained respiratory protection should be provided for fire fighters fighting fires in
buildings or confined areas. Storage containers exposed to fire should be kept cool with
water spray to prevent pressure build-up.
Fire Fighting Instructions:
No data available.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Non-Combustible
Non-combustible liquid - use extinguishing media for underlying cause of fire.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
6. ACCIDENTAL RELEASE MEASURES
After removal, flush contaminated area thoroughly with water. Avoid runoff into sewers.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
Safety glasses and chemical resistant gloves recommended.
Protective Precautions,
Protective Equipment and
Emergency Procedures:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Precautions To Be Taken in
Handling:
Keep container tightly closed when not in use. Store in a cool, dry place. Protect from
freezing. Avoid extreme high or low temperatures.
Precautions To Be Taken in
Storing:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format