SDS

04/10/2018Revision:
04/10/2018Printed:
Page: 3
Mold Armor Pre-Paint Cleaner1
SAFETY DATA SHEET
02/15/2018Supersedes Revision:
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits
No data. No data.
7681-52-9 Sodium hypochlorite {Hypochlorous
acid, sodium salt}
No data.
PEL: 2 mg/m3 CEIL: 2 mg/m3
1310-73-2 Sodium hydroxide {Caustic soda; Lye
solution}
No data.
When used by the consumer following directions for use and with adequate ventilation,
respiratory protection should not be needed.
Respiratory Equipment
(Specify Type):
Safety glasses recommended.
Eye Protection:
Wear impermeable gloves.
Protective Gloves:
No data available.
Other Protective Clothing:
Use with adequate ventilation.
Engineering Controls
(Ventilation etc.):
A source of clean water should be available in the work area for flushing eyes and skin.
Do not eat, drink, or smoke in the work area. Wash hands thoroughly after use.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
> 99.90 F
Autoignition Pt:
No data.
Flash Pt:
NA
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
1.070 - 1.080
Transparent yellow liquid
Clear and Free of Foreign Matter
Mild bleach odor
Appearance and Odor:
Vapor Pressure (vs. Air or
mm Hg):
No data.
Vapor Density (vs. Air = 1):
> 1 Air = 1
Evaporation Rate:
< 1 (BuAC=1)
Solubility in Water:
No data.
Completely soluble in water.
Solubility Notes:
Percent Volatile:
N.D.
pH:
12.5 - 13
Additional Physical
Information
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format