SDS

05/24/2022Revision:
05/24/2022Printed:
Page: 1 of 5
Mold Armor E-Z Multi-Purpose Pressure
Washer Concentrate
SAFETY DATA SHEET
05/09/2022Supersedes Revision:
Product Name:
Company Name:
Intended Use:
Product Code:
1. PRODUCT AND COMPANY IDENTIFICATION
Additional Information
Mold Armor E-Z Multi-Purpose Pressure Washer Concentrate
Mold and Mildew Stain Remover
FG583, FG583W, FG583HDWS, FG583WXX
EPA Registration # 4091-19.
6750 Lenox Center Court,
Memphis, TN 38115
Suite 200
W. M. Barr and Company, Inc.
2. HAZARDS IDENTIFICATION
Skin Corrosion/Irritation, Category 2
Serious Eye Damage/Eye Irritation, Category 2A
GHS Precautionary Phrases:
GHS Response Phrases:
GHS Storage and Disposal
Phrases:
GHS Hazard Phrases:
Warning
GHS Signal Word:
P264 - Wash hands thoroughly after handling.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P302+352 - IF ON SKIN: Wash with plenty of soap and water.
P305+351+338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 - Specific treatment see ... on this label.
P332+313 - If skin irritation occurs, get medical advice/attention.
P337+313 - If eye irritation persists, get medical advice/attention.
P362 - Take off contaminated clothing and wash before re-use.
H315 - Causes skin irritation.
H319 - Causes serious eye irritation.
This material is classified as hazardous under OSHA regulations.
OSHA Regulatory Status:
Potential Health Effects
(Acute and Chronic):
Causes skin and eye irritation.
CAS # Hazardous Components (Chemical Name)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Concentration
Sodium hypochlorite {Hypochlorous acid, sodium
salt}
7681-52-9 3.0 -7.0 %
Sodium hydroxide {Caustic soda; Lye solution} 1310-73-2 0.1 -1.0 %
Additional Chemical
Information
Specific percentage of composition is being withheld as a trade secret.
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format