SDS

03/07/2018Revision:
Page: 1
Mold Armor Multipurpose Pressure Washer
Cleaner
SAFETY DATA SHEET
Mold Armor Multipurpose Pressure Washer Cleaner
Product Name:
W. M. Barr and Company, Inc.
Company Name:
2105 Channel Avenue
Memphis, TN 38113
3E 24 Hour Emergency Contact
Emergency Contact:
[phone]
W.M. Barr Customer Service
Information:
[phone]
[phone]
Phone Number:
Mold and Mildew Stain Remover
Intended Use:
www.wmbarr.com
Web site address:
FG583
Product Code:
1. PRODUCT AND COMPANY IDENTIFICATION
2. HAZARDS IDENTIFICATION
P264: Wash hands thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
GHS Precaution Phrases:
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321: Specific treatment see label.
P332+313: If skin irritation occurs, get medical advice/attention.
P337+313: If eye irritation persists, get medical advice/attention.
P362: Take off contaminated clothing and wash before re-use.
GHS Response Phrases:
No phrases apply.
GHS Storage and Disposal
Phrases:
H315: Causes skin irritation.
H319: Causes serious eye irritation.
GHS Hazard Phrases:
Skin Corrosion/Irritation, Category 2
Serious Eye Damage/Eye Irritation, Category 2A
Warning
GHS Signal Word:
This material is classified as hazardous under OSHA regulations.
OSHA Regulatory Status:
Causes skin and eye irritation.
Potential Health Effects
(Acute and Chronic):
CAS # Hazardous Components (Chemical Name)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Concentration
7681-52-9 Sodium hypochlorite {Hypochlorous acid, sodium
salt}
< 6.0 %
1310-73-2 Sodium hydroxide {Caustic soda; Lye solution} < 1.0 %
Specific percentage of composition is being withheld as a trade secret.
Additional Chemical
Information
Licensed to W.M. Barr and Company
GHS format