SDS

02/12/2020Revision:
Page: 1 of 6
Mold Armor Rapid Clean Remediation
SAFETY DATA SHEET
08/01/2019Supersedes Revision:
Mold Armor Rapid Clean Remediation
Product Name:
W. M. Barr
Company Name:
2105 Channel Avenue
Memphis, TN 38113
3E 24 Hour Emergency Contact
Emergency Contact:
[phone]
W.M. Barr Customer Service
Information:
[phone]
[phone]
Phone Number:
Mold and Mildew Stain Remover
Intended Use:
www.wmbarr.com
Web site address:
FG590, FG591, FG592
Product Code:
1. PRODUCT AND COMPANY IDENTIFICATION
2. HAZARDS IDENTIFICATION
Skin Corrosion/Irritation, Category 2
Serious Eye Damage/Eye Irritation, Category 2A
Wash hands thoroughly after handling.
Wear protective gloves/protective clothing/eye protection/face protection.
GHS Precautionary Phrases:
IF ON SKIN: Wash with plenty of soap and water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Specific treatment see label.
If skin irritation occurs, get medical advice/attention.
If eye irritation persists, get medical advice/attention.
Take off contaminated clothing and wash before re-use.
GHS Response Phrases:
No phrases apply.
GHS Storage and Disposal
Phrases:
Causes skin irritation.
Causes serious eye irritation.
GHS Hazard Phrases:
Warning
GHS Signal Word:
Listed above.
Potential Health Effects
(Acute and Chronic):
CAS # Hazardous Components (Chemical Name)
3. COMPOSITION/INFORMATION ON INGREDIENTS
Concentration
7681-52-9 Sodium hypochlorite {Hypochlorous acid, sodium
salt}
1.0 -5.0 %
1310-73-2 Sodium hydroxide {Caustic soda; Lye solution} 0.1 -1.0 %
Specific percentage of composition is being withheld as a trade secret.
Additional Chemical
Information
Licensed to W.M. Barr and Company
GHS format