MSDS

ManualsBrandsMoldex ManualsPaint32 oz. Sealant Barrier Hose End Sprayer

Safety Data Sheet

Moldex Sealant

SDS Revision Date:

05/12/15

Page 1 of 8

1. Identification

1.1. Product identifier

Product Identity

MOLDEX

Sealant

Alternate Names

none

1.2. Relevant identified uses of the substance or mixture and uses advised against

Intended use

Coating - See Technical Data Sheet.

Application Method

Spray - See Technical Data Sheet.

1.3. Details of the supplier of the safety data sheet

Company Name

EnviroCare Corporation.

10 Upton Drive

Product or Company Information (M-F)

Wilmington, MA 01887

(info@envirocarecorp.com)

1-978-658-0123

Emergency

CHEMTREC (USA)

24 hour Emergency Telephone No.

1-800-424-9300

(Int. / Maritime)

+1-703-527-3887

2. Hazard(s) identification

2.1. Classification of the substance or mixture

No applicable GHS categories.

2.2. Label elements

Using the Toxicity Data listed in section 11 and 12 the product is labeled as follows.

No applicable GHS categories.

[Prevention]:

No GHS prevention statements

[Response]:

No GHS response statements

[Storage]:

No GHS storage statements

Summary of content (8 pages)

PAGE 1
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 1. Identification 1.1. Product identifier Product Identity MOLDEX Alternate Names none ® Sealant 1.2. Relevant identified uses of the substance or mixture and uses advised against Intended use Coating - See Technical Data Sheet. Application Method Spray - See Technical Data Sheet. 1.3. Details of the supplier of the safety data sheet Company Name EnviroCare Corporation. 10 Upton Drive Wilmington, MA 01887 (info@envirocarecorp.
PAGE 2
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 [Disposal]: No GHS disposal statements 3. Composition/information on ingredients 3.1 Chemical characterization (preparation) Chemical characteristics: acrylic polymer (dispersion in water) 3.2 Information on ingredients: Substances listed in the Subsections “HAPS” and “California Proposition 65 Carcinogens / Reproductive Toxins” that are not listed in this section are only present at quantities below 0.
PAGE 3
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 Medical Conditions Generally Aggravated by Exposure: None when used in accordance with safe handling and use information. See section 2 for further details. 5. Fire-fighting measures 5.1. Extinguishing media CO2, water fog, other. 5.2. Special hazards arising from the substance or mixture Hazardous decomposition: Carbon Monoxide and Carbon Dioxide 5.3.
PAGE 4
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 Keep out of reach of children. See section 2 for further details. - [Storage]: 7.3. Specific end use(s) No data available. 8. Exposure controls and personal protection 8.1. Control parameters Ventilation: Use with adequate ventilation. 8.2. Exposure controls Respiratory Do not breathe vapors, spray, mist or sanding dust.
PAGE 5
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 Specific Gravity Solubility in Water Partition coefficient n-octanol/water (Log Kow) Auto-ignition temperature Decomposition temperature Viscosity (cSt) Coating V.O.C. Material V.O.C. 1.002 (water=1) Not Soluble Not Measured Not Measured Not Measured Not Measured 44 g/l 1 g/l 9.2. Other information No other relevant information. 10. Stability and reactivity 10.1. Reactivity Hazardous Polymerization will not occur. 10.2.
PAGE 6
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 Serious eye damage/irritation --- Not Applicable Respiratory sensitization --- Not Applicable Skin sensitization --- Not Applicable Germ cell mutagenicity --- Not Applicable Carcinogenicity --- Not Applicable Reproductive toxicity --- Not Applicable STOT-single exposure --- Not Applicable STOT-repeated exposure --- Not Applicable Aspiration hazard --- Not Applicable 12. Ecological information 12.1.
PAGE 7
Safety Data Sheet Moldex Sealant SDS Revision Date: 14.3. Transport hazard class(es) 14.4. Packing group 05/12/15 DOT Hazard Class: Not Applicable Not Applicable IMDG: Not Applicable Air Class: Not Applicable Sub Class: Not Applicable Not Applicable Not Applicable 14.5. Environmental hazards IMDG Marine Pollutant: No 14.6. Special precautions for user No further information 14.7.TDG Hazard Class Not Applicable 15.
PAGE 8
Safety Data Sheet Moldex Sealant SDS Revision Date: 05/12/15 Water Acryilic Polymer 16. Other information The information and recommendations contained herein are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information contained herein. We accept no responsibility and disclaim all liability for any harmful effects which may be caused by exposure to our products.