Operating Instruction

FCC/ISED Notice:

This is a CONSUMER device.

• BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your

provider´s consent. Most wireless providers consent to the use of signal boosters. Some providers

may not consent to the use of this device on their network. If you are unsure, contact your provider.

• In Canada, BEFORE USE, you must meet all requirements set out in ISED CPC-2-1-05

• You MUST operate this device with approved antennas and cables as specified by the

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

• You MUST cease operating this device immediately if requested by the FCC (or ISED in Canada) or a

licensed wireless service provider.

• WARNING. E911 location information may not be provided or may be inaccurate for calls served by

using this device.

Link to ISED CPC-2-1-05:

https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/h_sf06136.html

➔ CPC-2-1 — Fixed and Land Mobile

➔ CPC-2-1-05 - Zone Enhancers

FCC RF Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. End users must follow the specific operating instruction for satisfying RF exposure

compliance. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Any changes or modifications not expressly approved by Molex could void the user's authority to

operate this equipment.

FCC ID: RK7MBC-NAR

IC 4774A-MBCNAR

PAGE 1
FCC/ISED Notice: This is a CONSUMER device. • BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider´s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. • In Canada, BEFORE USE, you must meet all requirements set out in ISED CPC-2-1-05 • You MUST operate this device with approved antennas and cables as specified by the manufacturer.